END CONNECTORS FOR VITRAGE WINDOW SILLS
The end connectors are provided with two drop-noses. One drop-nose of the end connector has the angle of 90° or 150°, and the second drop-nose – of 135° or 180°, respectively. For the customers’ convenience, each end connector drop-nose has the indication of the respective angle value in degrees.
The end connectors are designed strictly for the geometry of “Vitrage” sills, which allows totally avoiding even the smallest cracks and gaps during the installation, in contrast to the universal connectors by other manufacturers.
The end connectors are produced with the universal length of 700 mm. If you have to change the place for assembling, you may easily change the length of the end connector on your own by cutting off the overhanging end with conventional scissors.
Mahogany, sapelli, wenge, walnut terra
Angle connectors LUX
LUX corner connectors were especially designed for Crystallit window sills. They are produced from 100% ABS plastic. Their composition also contains a chemical compound for enhancing the gloss effect.
The end connectors are provided with two drop-noses. One drop-nose of the end connector has the angle of 90° or 150°, and the second drop-nose – of 135° or 180°, respectively. For the customers’ convenience, each end connector drop-nose has the indication of the respective angle value in degrees.